TEST hair clippers
More recently, electric hair clippers could be found only in the most expensive salons, barbers mostly used mechanical models that are driven by two handles, similar to the handles of pliers. Needed a certain skill, because when you press the lever wrist should not move, otherwise the machine shuddered and tore her hair, causing the client pain. But progress does not stand still. There are new electric cars that run faster and more accurate mechanical predecessors and do not cause pain when you clip.
Electric hair clippers quickly became widespread. But soon there was another problem - the problem of choice. Which model is preferred? What characteristics are important, what accessories are needed and which will not demand a real job?
To answer these questions by leading masters of the hairdressing salon "Olympic" in conjunction with the magazine "Bid" were tested hair clippers.
Tested parameters
• Smooth move or lightness of the machine depends on the severity of tooth blades fit the density of the upper blade to the bottom and, of course, the speed of the blades. In this machine must move forward, leaving no uncut areas, as well as "not buksuya" in her hair. If the machine has a smooth ride shearing rare soft hair, then it is not necessary that it remain smooth running and the hard thick hair.• Speed of promotion machine depends on the frequency of the blades. The higher the frequency, the greater the speed of progress. And the higher the rate of promotion, the less effort and time to spend on a haircut.
• Ease of cleaning. Despite the fact that the upper and lower blade held tightly to each other, the machine becomes clogged with hair.Cleaning of the hair should be performed after each haircut. It is therefore very important that the blade is easily separated from the machine, allowing you to clean the inside of the cavity. Lowest score on this parameter is the machine for cleaning are required to unscrew the screws holding the blades to the machine.
• Optimal weight machines - rather complicated to evaluate the parameter. If the machine is too heavy, the hand will get tired of keeping. A very easy machine to be harder to keep in position, it will be "jerky".
• Convenient location in the hand. This setting determines how comfortable hand when working with machine, including how convenient to use the buttons and switches.
• Easy to adjust nozzles. This parameter is the lowest score is given to machine, adjustable nozzle which was to remove the old nozzle and put a new one. Tips for Reconfigurable consider the number of possible installations and convenience of their shift.
• Noise and vibration. Pleasure to work with machine, noise at work is minimal, but the vibration felt by hand, not just annoying, but do interfere with smooth and precise movements, especially when running border.
• Opening hours without recharging. The lowest score for this parameter is supplied machine, whose work on battery power is not available, and the greatest - Cordless machine with the largest charge.
• Convenience store. Most convenient to store cars, with the base.Better to stand on it was possible to arrange not only the machine, but the accessories that are included (eg, nozzles). In assessing the convenience of storage machines, which are attached to the bag or boxes, were taken into account the size and weight of the latter.
Test Results
Test were 12 models from different manufacturers. Evaluation of test parameters was performed on a scale. Typewriters within 7 days of working with different clients master cabin "Olympic".
Clipper can hardly be called sophisticated household appliances and more difficult to carry out a comparison of models from different manufacturers. Just a great experience professionals can identify convenience or inconvenience of a function machine. It would seem as good when attached to the machine a lot of tips.However, it appeared that in the process to change their hairstyle very uncomfortable, much more convenient when the kit includes a nozzle, whose height can be adjusted by pushing and bringing it closer to the blades of the machine.
It is worth noting that the masters do not use scissors that came with the tested machine, because in their view, these scissors are "viscous compound, ie, open and close are not so easily and quietly, we would like.
More recently, electric hair clippers could be found only in the most expensive salons, barbers mostly used mechanical models that are driven by two handles, similar to the handles of pliers. Needed a certain skill, because when you press the lever wrist should not move, otherwise the machine shuddered and tore her hair, causing the client pain. But progress does not stand still. There are new electric cars that run faster and more accurate mechanical predecessors and do not cause pain when you clip.
Electric hair clippers quickly became widespread. But soon there was another problem - the problem of choice. Which model is preferred? What characteristics are important, what accessories are needed and which will not demand a real job?
To answer these questions by leading masters of the hairdressing salon "Olympic" in conjunction with the magazine "Bid" were tested hair clippers.
Tested parameters
• Smooth move or lightness of the machine depends on the severity of tooth blades fit the density of the upper blade to the bottom and, of course, the speed of the blades. In this machine must move forward, leaving no uncut areas, as well as "not buksuya" in her hair. If the machine has a smooth ride shearing rare soft hair, then it is not necessary that it remain smooth running and the hard thick hair.• Speed of promotion machine depends on the frequency of the blades. The higher the frequency, the greater the speed of progress. And the higher the rate of promotion, the less effort and time to spend on a haircut.
• Ease of cleaning. Despite the fact that the upper and lower blade held tightly to each other, the machine becomes clogged with hair.Cleaning of the hair should be performed after each haircut. It is therefore very important that the blade is easily separated from the machine, allowing you to clean the inside of the cavity. Lowest score on this parameter is the machine for cleaning are required to unscrew the screws holding the blades to the machine.
• Optimal weight machines - rather complicated to evaluate the parameter. If the machine is too heavy, the hand will get tired of keeping. A very easy machine to be harder to keep in position, it will be "jerky".
• Convenient location in the hand. This setting determines how comfortable hand when working with machine, including how convenient to use the buttons and switches.
• Easy to adjust nozzles. This parameter is the lowest score is given to machine, adjustable nozzle which was to remove the old nozzle and put a new one. Tips for Reconfigurable consider the number of possible installations and convenience of their shift.
• Noise and vibration. Pleasure to work with machine, noise at work is minimal, but the vibration felt by hand, not just annoying, but do interfere with smooth and precise movements, especially when running border.
• Opening hours without recharging. The lowest score for this parameter is supplied machine, whose work on battery power is not available, and the greatest - Cordless machine with the largest charge.
• Convenience store. Most convenient to store cars, with the base.Better to stand on it was possible to arrange not only the machine, but the accessories that are included (eg, nozzles). In assessing the convenience of storage machines, which are attached to the bag or boxes, were taken into account the size and weight of the latter.
Test Results
Test were 12 models from different manufacturers. Evaluation of test parameters was performed on a scale. Typewriters within 7 days of working with different clients master cabin "Olympic".
Clipper can hardly be called sophisticated household appliances and more difficult to carry out a comparison of models from different manufacturers. Just a great experience professionals can identify convenience or inconvenience of a function machine. It would seem as good when attached to the machine a lot of tips.However, it appeared that in the process to change their hairstyle very uncomfortable, much more convenient when the kit includes a nozzle, whose height can be adjusted by pushing and bringing it closer to the blades of the machine.
It is worth noting that the masters do not use scissors that came with the tested machine, because in their view, these scissors are "viscous compound, ie, open and close are not so easily and quietly, we would like.
Комментариев нет:
Отправить комментарий